• Start
• LED On-Camera Lighting
  • Multicolor range
  • Multicolor II (New)
  • L range
  • L-48u (New)
  • L-42u (New)
• Accessories
  • External controller NRC-03 (New)
  • NRC-03 extension cable (New)
  • Extra battery adapter with battery charge status
  • Extra D-Tap cable
  • DC cable (lighter plug)
  • DC cable (standard plug)
• Where to buy
• Download
  • User's manuals
  • Multicolor II
  • L-48u/L-42u
• News
• About us

 
- Fully dimmable from 0% to 100% and flicker free in the whole range

- Variable color temperature from 3000K to 7000K

- Digital color temperature memory

- External brightness and color temperature controller inputs

- Ergonomic design and light weight - only 230g (0,5 lbs)

- Battery adapter with battery charge status (or D-TAP cable)

- Aluminum case

 
NESKE Multicolor II is the second edition of the innovative solution in on-camera lighting. Forget about using filters - with high brightness and continously variable color temperature you will get the best light in all conditions. With the touch of a button you will quickly store any color temperature and use it anytime. Working with a camera crane or stabilization system will be facilitated due to the possibility of connecting external brightness and color temperature controller.

The light has unprecedented features, definitely improving comfort of work:

VARIABLE COLOR TEMPERATURE
Scope covers the whole range of 3000K-7000K. Quick access to the color temperature change provides a potentiometer working with a digital accuracy. There are no limiting color and brightness parameters imposed by the manufacturer - here you have complete freedom in creating the light corresponding to any situation on set.
 
DIGITAL COLOR TEMPERATURE MEMORY
Built-in microprocessor allows you to save any color temperature in the memory bank. To invoke the preset just press the button, then if you want to save another CCT, hold the button for 1.5 s (indicated by yellow LED flash) - really simple, but makes the job easier. You can instantly switch between two completely different color sets. You have not only continously variable CCT, but you can also immediately recall pre-determined parameters. The type of microprocessor keeps the settings in the memory even after power off.
 
EXTERNAL BRIGHTNESS AND COLOR TEMPERATURE CONTROLLER
An innovative solution is to connect two external controllers NRC-03. Using the NRC-03 you can adjust power and color temperature being up to 25 meters from the lamp. High range allows comfortable work in conditions which gave big problem so far. It is an indispensable feature when you put the lamp on a camera crane or high tripod. It also improves the comfort when working with all the stabilization systems - with the velcro wristband you can attach it almost anywhere. Controller activity is indicated by corresponding color LED (green-brightness, red-color temperature), so that you will always know what each controller is for, without figuring out in which socket the jack was inserted.
 
HIGH BRIGHTNESS AND TWO MODES OF LUMINANCE
Outstanding bright light (see table above) provides plenty of power and reliability in every situation. You will enlighten the set even from a distance without worrying about the lack of sufficient light. With the Multicolor II you can get equivalent of 90W halogen light intensity. You also get two modes of luminance characteristics. In mode I, while adjusting color, luminance varies linearly, while in mode II - logarithmically (which is maintained by the constant luminance value). Mode selection does not change the function of color temperature knob. The change applies only to the characteristics of the luminance parameter.